Manufacturing injuries are less common than they were as each decade passes. However, when they happen they are usually very serious. From decapitations to limb loss, the price of a manufacturing accident can be severe. Many of these accidents happen in major shipping ports, like in Miami. This guy is a great Miami injury attorney that has helped get some major settlements associated with personal injury accidents.
In the work of manufacturing, there is usually plenty of left over space at different times during the business cycle. This unused space can be put to work by leasing it out to other companies and individuals. If you end up taking on this task, then you will need a credit check for landlord to determine who is the best candidate.
There are two main categories of popular inflatable manufactured goods. The categories are balloons and tires. Balloons are inflatable bags made of rubber, nylon, or latex and filled with gases such as oxygen, air, or helium. Balloons can be used to serve a wide range of purposes due to their low cost. The most common uses of balloons are primarily for decoration.
A manufactured home is a home that is built at a factory and then driven to the site where it will be lived in. Artcraft is a company that designs and builds these manufactured homes. Artcraft manufactured homes are handcrafted by amazing craftsmen. The company is located in North Carolina and only service Ashe, Avery, and Watuaga counties.
Skirting refers to something that is used as a border or edge around an object. There are skirts for your beds, skirting kits for cars, and even skirting for homes. Skirting for manufactured homes protects your house from rodents and bugs. These animals can cause serious damage to your home and adding a skirt around it will prevent any infestation. Not only is skirting functional it is also very fashionable and adds a personal touch to the exterior of your home.
A manufactured home is a home that is constructed completely in a factory. Manufactured homes can also be referred to as mobile homes or factory made homes. After the home is built it is then delivered by tractor trailer to the area where the home will be placed. Although the homes will usually remain in one place they can always move to another location if necessary.
For over forty years Redman homes has been building quality homes for families all over the northeast. They are one of the most respected housingmanufacturers in the country. Redman manufactured homes can be found in several states which include Michigan, Tennessee, Arkansas, Colorado, Kentucky, and more. Construction for these homes occurs year round in highly regulated environments.
Greentree is one of the largest lenders of manufactured home loans in the country. In fact, it is one of the two largest to be exact sharing the spot with Green Point Credit Corporation. Together these two lenders control approximately 30 percent of the market. Green Tree was founded over 30 years ago and has 29 locations all across the country.
Waterwise is a company that produces shower filters, water distillers, storage containers, and other water accessories. Waterwise distillers manufactured items produce only pure distilled water. The quality of their products has remained unsurpassed in their industry. Distilled water is the only water that should be consumed. This promotes good health because it regulates your body temperature, improves the oxygen delivery to your cells, and improves your immune system.
The N.A.D.A manufactured housing appraisal guide is filled with 40 years of housing prices from 1972-2011. The average retail price for over 750 manufacturers is included in the guide. NADA provides a list of manufacturers address and phone numbers for customers as well. There is also a helpful guideline to assist you with wholesales and loans. The appraisal guide is updated yearly in January, May, and September.
Equity funding is an investment practice that involves mutual funds and life insurance policies. The mutual funds are used to pay off the life insurance policies. This is done by using the value that the mutual fund shares are worth to pay off the premiums of the life insurance policy. This method is very beneficial to the investor because it gives them the protection of insurance with the potential growth of a mutual fund.
Corkys food manufacturing is a company located in Memphis, Tennessee that specializes in BBQ products. Corky’s also manufactures additional items for commercial uses such as dough machines, dishwashers, plastic shovels, icing sets, food slicers, and more. Out of all the products they manufacture they are best known for their BBQ products; especially their mouth watering flavorings and sauces.
Items that are treated with pyroxylin are either proxylin coated or proxylin impregnated. The difference between these two processes is the way the coating is applied and how much of it is used. The material being worked with also influences which process is used. The chemicals in pyroxylin consist of a plasticizer, coloring matter, nitrocellulose, and a solvent. The plasticizer causes softness and flexibility in the object being treated.
Ocean Spray has been a leading producer of bottled and canned juice drinks for over 75 years. The company is a cooperative that is owned and operated by cranberry growers throughout North America. The company’s main headquarters is located in Massachusetts. Their cranberry juice products are beneficial for your health since they are a source of vitamin C, and their unique compound helps to cleanse the body.
A gantry robot is a stationary robot that does not look anything like the classic image of a robot. Gantry robots can also be called Cartesian robots and usually contain at least three different motions. Each motion is set up to be perpendicular to one another and are generally labeled X,Y, and Z. Gantry robots can be made to be any size and have many advantages over other types of robots. One main advantage is that gantry robots have greater position accuracy.
Photosensitized paper products allow you to create prints of your favorite products by laying them out in the sun. The process for creating these prints is fairly simple and can be done by any one. You just take whatever object you have selected and place it onto the photosensitized paper. The object is then left to sit for a few minutes in the sunlight. To get your final print simply remove the object and rinse the paper to fix it.
Bentwood products manufacturing company is located in Dublin, Ohio. They are a private company owned and operated by Moldings, Architectural: Plaster of Paris. The company was founded in 1989 and currently is estimated to have annual revenue of $490,000. They manufacture various nonmetallic mineral products. Some of these products include vacuum moldings, reacting injection moldings, and blow moldings.
Zep is a company that manufactures a large selection of cleaning products for industrial use. The company was founded in 1937 in Atlanta, Georgia. Its reach has now spread into every major city in the United States and has even globally expanded onto five continents. The Zep name is carried on more than 3,500 products of superior quality. Some of these products include hand cleaners, detergents, floor finishes, disinfectants, and deodorants.
Working with adhesive sprays can be confusing and also very messy. These sprays can be used to glue pieces of plywood together. It is important that the spray tip has no obstructions since this can cause many problems. The adhesive sprays should be used at room temperature in a well ventilated area. Keep a good distance between you and the surface to avoid extended drying times. Hold the spray can vertically instead of horizontally.
Fishfinders operate using sonar technology. Sonar technology uses sound waves to locate objectes underwater. The fishfinder works by sending out a sound wave into the water in a cone shape. If something is located inside this beam of sound a signal is sent back to the fishfinder. By calculating the amount of time between when the sound wave is sent out and when the signal is heard, you can measure how far the object is from your boat.
Lean manufacturing is a practice of production that uses only the resources required for production to eliminate waste. Waste refers to any activity that does not benefit the outcome of the final product. Examples of waste include waiting time, inventory, processing, and over-production. The goal of lean manufacturing is to produce more efficiency by optimizing work flow. By eliminating wastes costs are reduced and quality is improved. The outcome is a better product for a lower cost.
Danaher is a leader in the technology field that designs and manufactures new and advanced products to various clients around the globe. Their products cover the most demanding applications internationally and create endless possibilities for their users. The idea for the company was created on a fishing trip on the Danaher River in Montana. The founders wanted to create a manufacturing company that was focused on customer satisfaction.
Waterless hand soaps are available for hand washing in a gel or foam form. These hand washes allow you to wash your hands using an alcohol based product without any water. The gel dries faster than the foam and irritates and dries the skin less. After making contact with your hands for 15 seconds either of these products can destroy 99.9% of germs. These products are very convenient when soap and water are unavailable such as during camping, fishing, or traveling.
A phonocardiograph is an electroacoustic machine that helps record the sounds and murmurs of the heart. There is little noise and distortion and you can audio monitor with the built-in speaker. Operating a phonocardiograph is very simple. You place the electronic sensor onto the patient’s chest. The selectors then have to be adjusted depending on what pitch and intensity the user desires. The sounds of the heart will be played through the built-in speaker.
Looking forward to connecting with broader manufacturing community at APICS 2009, Oct 4-6.
We’ll have a demo pod for Oracle MOC and some speaking slots so looks like an exciting event.
My schedule – arriving on Sunday evening, leaving on Tuesday night.
Manufacturing companies, plant IT and manufacturing users, looking for relevant sessions at OOW? Attached documents provides you all the details you need.
Focus On Manufacturing
Focus on EAM
For MOC, specifically, we have two dedicated sessions and a dedicated demo pod. You can find the information in any of the above two documents.
Look forward to seeing you all there!
Please join us for a webcast on Oracle Manufacturing Operations Center.
Date and Time: Thursday July 16, 9 am, Pacific Time
Please enroll using the following link
Conference Key is “advisor”, all lower case.
Title: Introducing Oracle Manufacturing Operations Center in Release 12.1.
In the current economic environment, manufacturing customers are focused on cost cutting and are increasingly [...]
Here’s a recent podcast that tells you more about Oracle Mfg Operations Center and mentions the blog
Improving Shopfloor Data Collection with Oracle Manufacturing Operations Center
Posted: 18 May 2009 05:00 PM PDT
Successful factories around the world leverage information to drive their production and supply chains. New tools are available today to [...]
Be part of Oracle’s performance Driven Manufacturing and plan to, attend the 2nd Annual Oracle Manufacturing Summit at Pella. If you have experience applying application solution to manufacturing operations you should not miss this event!
27 – 28, April, 2009
102 Main Street
Pella, IA 50219
Spring Events Calendar
Free Event - Oracle’s Applications Unlimited Experts Live! Virtual Show - Wednesday March 11, 2009.
This action packed day kicks off in high gear with a compelling keynote from Ed Abbo, Oracle’s Senior Vice President of Applications Development. The remainder of the day is packed with live sessions as [...]
For the Big 3 and UAW to compete globally, they must change their monolithic manufacturing methods to adaptive manufacturing like Nissan who was the only auto manufacturer to make their 08 sales projection. Why? Nissan’s newest plants are able to adapt to market change by making 2-5 models across lines and adjust based on demand, [...]
A very timely conference on the subject of the leadership required to manage the sustainability of our world. On the eve of the event the citizens of the United States elected a new president after 8 years of George W. Bush (it was quite a scene in Times Square…).
Valuable perspectives were provided on Corporate [...]
Came across another interesting link. This is a resource provided by Stanford University and can be very helpful in teaching kids or anybody about manufacturing. They have online videos on the making of most everyday things from candy to cars and airplanes.
Here’s the link