As people who know me might know I have been playing around with various wearables for some years now, starting with a Nike Fuel Band, and also trying out products from Misfit and UP along the way. I have mostly just watched with interest as my exercise levels, and indeed sleep now we have a little one in the house, has gone up and down over time.
Sometimes it would be really nice to have named method parameter in Java, this doesn't look likely for a long while but there is always another little work around, for example using a builder pattern to get similar behaviour, that will bridge the gap for a little bit. It occurred to me that using the Lambda support in JDK 8 you could get something very close without the boiler plate required by some of the other methods.
In this post I describe how I implemented an interesting Use Case where the customer wanted to have an alternate message in the LOV when there is no data found. We all know how this can be changed in an af:table component by simply changing the emptyText property. In a List of Values, this works 'slightly' different.
So I was presented with a large suite that I need to distribute amongst an arbitrary number of Hudson slaves. Now my first guess would be to hand balance this into N sub suites; but that would require on-going work and would need to change depending on the number of nodes. (We have a target of 30 minutes to run all tests in parallel which is going to take some machines)
Over the last couple of years, or better in the last decade I have implemented several reporting solutions with Jasper Reports in ADF. I did that in ADF 10g, ADF 11.1.1.x, ADF 11.1.2.x and ADF 12.1.x
I also used several version of Jasper Reports. There is a whole lot of documentation, blogposts and presentations available. So when today I got a request from one of my customers to make a setup for
In the previous 3 posts, building towards the eProseed IoT Hackathon, I described how to setup your Raspberry Pi, and how to use the GrovePi sensors. The used example is a small weather-station that read temperature and humidity and shows the readings on a display. That is all very nice, however, the data remains local on the Raspberry Pi so there is nothing that we can do with this information
In one of my projects I ran into a requirement where the end user needs to be presented with default values in the table filters. This sounds like it is a common requirement, which is easy to implement. However it proved to be not so common, as it is not in the documentation nor are there any Blogpost to be found that talk about this feature. In this blogpost I describe how to implement this.
Weblogic server comes with a shared library so you can deploy JAX-RS 2.0 applications; but is limited to Jersey version 2.5.1 and the instructions for changing this are not entirely obvious or straightforward. I have recently joined a new team at Oracle and one of the first things I did was to look at upgrading the dependent libraries.
In my previous post I showed you how to setup a simple weather-station using Raspberry Pi, GroovyPi sensors and Python. It worked very well, but there is definitely room for improvement. In this short post I describe some of these improvements. First you will learn how to start the weather-station when you reboot the Pi. Next I will show you how to create some decent log info.
Last week I visited ODTUG KScope15 in Hollywood Florida. In this post I will share my findings and hope that you can benefit from it.
My general impression of the conference is that it was to hot for me in Florida. At least to hot for a conference. If you can sit on the beach whole day long, it is a great place to be, but hey, I had to work.... From a content perspective, there was a whole lot of