Oracle VM Consulting
view counter

IOPS and latency are not related - HDD performance explored

Thanks to Richard Elling for this story

Today, we routinely hear people carrying on about IOPS-this and IOPS-that. Mostly this seems to come from marketing people: 1.5 million IOPS-this, billion IOPS-that. Right off the bat, a billion IOPS is not hard to do, the metric lends itself rather well to parallelization...This post is the first in a series looking at the use and misuse of IOPS for storage system performance analysis or specification.Let's do some simple math. We all want low latency -- the holy grail of performance. In the bad old days, many computer systems were bandwidth constrained in the I/O data path, so it was very easy to measure the effect of bandwidth constraints on latency. For example, fast/wide parallel SCSI and UltraSCSI was the rage when the dot-com bubble was bubbling, capped out at 20 MB/sec. Suppose we had to move 100 MB of data, then the latency is easily calculated:Bad Old Latency = amount of stuff / bandwidth = 100 MB / 20MB/sec = 5 secWell, there it is, 5 seconds later.  For modern computers, 6Gbps SAS or SATA is prevalent. So a modern system's disk channel bandwidth is around 750 MB/sec:Good New Latency = 100 MB / 750 MB/sec = 0.133 secSweet! But that is just channel bandwidth, for HDDs there is another limiting factor, the media bandwidth. For bulk HDDs, you can guess 150 MB/sec for media bandwidth and you'll be in the ballpark. Consult the datasheet or detailed design docs for your drive to see its rating.The effect of the elimination of latency in the data path has led to an interesting change in systems thinking. The good news is that bandwidth generally isn't an issue. The bad news is that the marketing folks need something else to spew about. Something that goes up and to the right when you graph it over time, just like your stock portfolio. In other words, latency doesn't work because you are happier when it is smaller. The solution to this marketing dilemma: talk about IOPS! They go up and to the right, bigger is better, my product has more than yours, and the 2-drink minimum ensures a party well into the night.Let's revisit our scenario. Assume that we have a fixed, 4KB I/O size, which is reasonably common for many workloads, especially those running on Intel x86-based systems today.IOPS = amount of stuff moved / latency = (100MB / 4KB) / 5 = 5,000 IOPSor better yet..IOPS = (100MB / 4KB) / 0.133 = 187,500 IOPSHow about them apples! A million IOPS cannot be far away! Billions will follow! Joy and happiness will overtake the legions of struggling performance geeks and all will be good in the universe!Hold it right there, fella! Unfortunately is doesn't quite work like that. The physics behind the technology says you can maintain 100MB/sec (or media bandwidth) as long as you don't have to seek. It turns out that most real-world workloads are not of the streaming bandwidth type. Just a little seek to an adjacent track and you blow the whole equation. What's worse, for HDDs it gets blown in unpredictable ways. To deal with unpredictable systems, we resort to our good old friends, measurement and statistics. So let's take a look at how a HDD reacts to a random workload -- where one wants to see high IOPS.The workload of choice is a full-stroke 4KB random workload. The victim under test, a typical 7,200 rpm 3.5" HDD (most vendors have similar performance specs). If you look at the datasheet you might see specifications like:Average seek time: 8.5 msAverage rotational delay: 4.17 msThe average rotational delay is based on the rotation speed, 7,200 rpm. Pay close attention to these specs for HDDs and be aware that many of the new, low power "green" drives have variable rotational delay (read as: random I/O performance will suck even worse). From the specs, we can expect that an average random read will take around 12.5 ms. We test the drive, and sure enough we get 12.5 ms, for a single thread case. This is good, because it means that the datasheets don't lie and I can rely on them for system sizing without ever actually testing the HDD. Now that we know the average latency, it is a simple matter of math to get the IOPS.IOPS = 1/avg latency = 1/0.0125 = 80 IOPSWell, there it is. If you know nothing at all about a drive, you can guess that it should be able to deliver 80 IOPS, give or take a few. Drives with faster rotational speed, such as 15krpm, reduce the rotational delay and the real fast, enterprise-grade HDDs can also reduce the average seek time to a few ms. Do the math and you'll find them around 80 to 200 IOPS.But Richard, this is a long way from a billion IOPS. Yes, it is. But before we go there, we need to take another look at the HDDs under concurrent load. The above case is for a single I/O operation at a time. Remember when I said IOPS can be easily tamed by parallelization, let's give it a try. For the next test, lets increase the number of concurrent I/O operations. Modern HDDs have either Tagged Command Queuing (TCQ) for SCSI or Native Command Queuing (NCQ) for SATA. The idea is that you can submit multiple I/O operations to a HDD and it will optimize the head movements to give you better performance. We adjust our test to measure 100% writes and 100% reads for 4KB random I/Os with 1, 2, 4, 6, 8, or 10 threads. ZFS fans will know that 10 is a magic number because it is the default I/O concurrency for disks. Since these tests result in multiple answers, it is best to graph them.There is our 80 IOPS for 100% reads with a single thread, so our tests look legitimate. But wait... the rest of the measurements are slightly unexpected. We can reconcile the better performance for writes due to the write buffer cache in the drive (and the workload does not issue SYNCRHONIZE_CACHE commands). So ok, good, we can get 180 write IOPS to the drive, a bonus over the 80 IOPS for reads.But, hold it right there again, fella! Remember when we said that the IOPS is related to latency? This data shows that there is no correlation between IOPS and latency for concurrent workloads on HDDs! Latency is on the X axis and IOPS is on the Y axis, so the data clearly shows that IOPS tends to remain constant around 180 to 190 IOPS for the write case even though the average latency ranges from around 5.5 ms up to more than 55 ms. Reads are even worse, where at around 137 IOPS average latency is more than 70 ms. Going back to our math:IOPS = 1/avg latency = 1/75 ms = 13.3 IOPS13.3 IOPS != 137 IOPSClearly, there is no correlation between IOPS and latency for concurrent workloads on HDDs! What the data shows is that some I/Os are efficiently handled by the drive's elevator algorithm, but there are other I/Os that get penalized rather badly. Some of the maximum measurements, not shown in the graphs, were in the 900+ ms range. Perhaps these measurements need to include reporting of the standard deviation in addition to the mean? Pity the poor application that has to wait 900 ms because all of the other I/Os were being serviced out of order.Back to the marketing department... a billion IOPS should look like:Latency = 1/IOPS = 1/1,000,000,000 = 1 nanosecond (ns)Can you reasonably expect a 1 ns response time for any I/Os on any modern computer system? Absolutely not! You can't even get 1 ns response time from memory, let alone across the PCIe interconnect, through an HBA, down the wire to the disk and back again. Clearly, the games the marketeers are playing have one or more of the following caveats:

view counter
  1. Big I/Os are being divided ex post-facto into smaller I/Os, as shown in the UltraSCSI example above.
  2. I/Os are a strange or useless size. We've seen this recently from FusionIO (who should know better!) saying 1 billion IOPS where each I/O was 64 bytes. A more accurate statement is perhaps that they passed 1 billion PCIe transactions per second, except that they didn't say how big the PCI transfers were, so they could be confusing the public with #1, too.
  3. Parallel storage systems are prevalent, but very often do not deliver better latency. The analogy I typically use here is: nine women can deliver nine babies in nine months (IOPS), but nine women cannot deliver a baby in one month (latency).

I've painted a bleak picture for HDDs here, and indeed their role in high performance systems is over. SSDs won, game over. There are some very good SSDs that have very consistent, low latency and are amongst my favorite choices for cases where latency is important. Even more are being developed as I type, and it is an interesting time to be in the storage business. If you can, please help squash the crazy marketeers who are spewing dribble by understanding your system and how latency matters.As we deliver better tools for observing latency and its effects on your storage workload, we will necessarily have to discourage use of meaningless or confusing measures. Bandwidth is already buried, IOPS will be next. Stay tuned...

Read the entire article at its source

view counter